configure isis wide-metric

configure isis [vlan all | {vlan} vlan_name] wide-metric metric {level[1 | 2]}

Description

This command sets the wide metric value for one or all IS-IS VLANs.

Syntax Description

vlan all Applies the configuration to all IS-IS VLANs.
vlan_name Specifies a single VLAN to which the configuration applies.
metric Sets the metric. The range is 1 to 16777214.
level [1 | 2] Limits the configuration change to either level 1 or level 2. If neither level 1 nor level 2 is specified, the configuration applies to both levels.

Default

10.

Usage Guidelines

If the wide metric style is enabled on the associated IS-IS router process, the wide metric value is used in Extended IP reachability TLVs, Extended IS Reachability TLVs, and IPv6 Reachability TLVs in LSPs.

Example

The following command sets the wide metric to 15 for all IS-IS VLANs:

configure isis vlan all wide-metric 15

History

This command was first available in ExtremeXOS 12.1.

Platform Availability

This command is available on platforms with a Premier license as described in the Switch Engine v33.1.1 Licensing Guide document.